Tetracyanometalates of Ni, Pd, and Pt with Cyclic Diquaternary

Template construction of a series of supramolecular coordination polymers via 6,7-dihydro-5H-[1,4]diazepino[1,2,3,4-lmn][1,10]phenanthroline-4,8-diium...
1 downloads 0 Views 568KB Size
Download PDF
Inorg. Chem. 2002, 41, 4396−4404

Tetracyanometalates of Ni, Pd, and Pt with Cyclic Diquaternary Cations of 2,2′-Bipyridine and 1,10-Phenanthroline. A Vibrational, Crystallographic, and Theoretical Study of Intermolecular Weak Interactions Pablo Vitoria,‡ Javier I. Beitia,*,† Juan M. Gutie´rrez-Zorrilla,*,‡ Emilio R. Sa´iz,† Antonio Luque,‡ Maite Insausti,‡ and Jose´ J. Blanco‡ Departamento de Quı´mica Inorga´ nica, Facultad de Farmacia, UniVersidad del Paı´s Vasco, Apartado 450, 01080 Vitoria, Spain, and Departamento de Quı´mica Inorga´ nica, Facultad de Ciencias, UniVersidad del Paı´s Vasco, Apartado 644, 48080 Bilbao, Spain Received January 9, 2002

The compounds (bpy-dq)[Ni(CN)4]‚2H2O (1), (bpy-dq)[Pd(CN)4]‚2H2O (2), and ((bpy-dq)[Pt(CN)4]‚2H2O (3) (bpy-dq ) (C12H12N2)2+, 6,7-dihydrodipyrido[1,2-a:2′,1′-c]pyrazinediium) and (phen-dq)[Ni(CN)4] (4), (phen-dq)[Pd(CN)4]‚ H2O (5), and (phen-dq)[Pt(CN)4]‚H2O (6) (phen-dq ) (C14H12N2)2+, 5,6-dihydropyrazino[1,2,3,4-lmn]-1,10phenanthrolinediium) have been synthesized and characterized by X-ray diffraction. The three bipyridinium diquaternary salt derivatives are isostructural. The crystal structures of these dihydrated compounds consist of columns formed by alternating anion complexes and diquaternary cations, π−π interacting through cyanide ligands and the aromatic rings, and stabilized by an extended hydrogen-bond network. On the other hand, the packing in the phenanthrolinium diquaternary salt derivatives is strongly dependent on the hydration degree. Thus, the anhydrous [Ni(CN)4]2- compound presents a laminar arrangement and the hydrated salts show a columnar packing, similar but not the same as compounds 1−3. The anhydrous form of compound 5 is isostructural with compound 4. Vibrational (IR, Raman) and thermogravimetric studies of these compounds have been carried out. Finally, DFT calculations have been performed on the isolated tetracyanometalate anions and diquaternary cations to assign the fundamental modes in the vibrational spectra. The intermolecular weak interactions were studied through the analysis of the charge density by using the theory of atoms in molecules (AIM).

Introduction Ion pair charge transfer (IPCT) complexes of the type {A2+[ML2]2-}, wherein the acceptor A2+ is a dicationic bipyridinium or phenanthrolinium derivative and [ML2]2is a planar metal dithiolene, form an interesting subclass of donor-acceptor systems which have been reported by Kisch et al.1 The redox properties of these compounds can be tuned depending on the metal M, the ligand L, and the nature of the acceptor cation. In the course of our study on charge-transfer ion pairs we have investigated systems derived of o-phenylenebis(oxamato)cuprate(II), [Cu(opba)]2-, and various cyclic diquaternary cation salts of the formula (phen-dq)[Cu(opba)]‚3H2O * Author to whom correspondence should be addressed. E-mail: [email protected]. ‡ Facultad de Ciencias. † Facultad de Farmacia.

4396 Inorganic Chemistry, Vol. 41, No. 17, 2002

and Na2(bpy-dq)[Cu(opba)]2‚4H2O. These compounds exhibit ion-pair charge-transfer (IPCT) bands in the region 400600 nm both in the solid state and in aqueous solution.2 Recently we have extended our study to tetracyanometalates of diquaternary cations. The structural data available for the 4,4′-bipyridinium and phenanthrolinium salts show that there are several possibilities of charge dissipation through different types of hydrogen (1) (a) Kisch, H.; Du¨mler, W.; Chioboli, C.; Scandola, C.; Salbeck, J.; Daub, J. J. Phys. Chem. 1992, 96, 10323. (b) Kisch, H. Coord. Chem. ReV. 1993, 125, 155. (c) Kisch, H. Comments Inorg. Chem. 1994, 16, 113. (d) Nunn, I.; Eisen, B.; Benedix, R.; Kisch, H. Inorg. Chem. 1994, 33, 5079. (e) Lemke, M.; Knoch, F.; Kisch, H.; Salbeck, J. Chem. Ber. 1995, 128, 131. (f) Schmauch, G.; Knoch F.; Kisch, H. Chem. Ber, 1995, 128, 303. (g) Hofbauer, M.; Mo¨bius, M.; Knoch, F.; Benedix, R. Inorg. Chim. Acta 1996, 247, 147. (h) Kisch, H. Coord. Chem. ReV. 1997, 159, 385. (2) Unamuno, J.; Gutie´rrez-Zorrilla, J. M.; Luque, A.; Roma´n, P.; Lezama, L.; Calvo R.; Rojo, T. Inorg. Chem. 1998, 37, 6452.

10.1021/ic0200287 CCC: $22.00

© 2002 American Chemical Society Published on Web 07/26/2002

Tetracyanometalates of Ni, Pd, and Pt Table 1. Selected Experimental and Theoretical IR and Raman Bands (cm-1) for Compounds 1-6 M(CN)42- Anions Ni(CN)42-

Pd(CN)42-

Pt(CN)42-

1

4

DFT

2

5

DFT

3

6

DFT

symmetry and assignment

2142 2132 2127 2116

2133 2123 2113

2139 2129 2124

2157 2149 2139 2129

2148 2137 2127

2152 2135 2129

2155 2137 2123

2162 2138 2128

A1g(R) B1g(R) Eu(IR)

νs(CtN) νas(CtN) νas(CtN)

398 303 296

396 313 295

417 294 286

417 291

473 392 294

2156 2140 2136 2127 495 461 317

495 456 317

497 442 326

Eu(IR) A1g(R) Eg(R)

νas(M-C) νs(M-C) δoop(M-CN)

109

B2g(R)

δ(C-M-C)

403 374 298 109

101 Diquaternary Cations (Raman Spectra) bpy-dq

phen-dq

1

2

3

DFT

symmetry

4

743 733 645 608 550 537 498 398 389 316 278 217 196

743 733 645 608 550 537 498 397 389 314 277 219 200

740 738 645 606 550 536 498 396 389 317 277 216 192

756 741 657 610 557 543 503 398 397 315 276 199 181

A A B B A A B A B A A B A

608 590 546 539 516 505 464 431 393 217

bonds in which the nitrogen end of cyano ligands, water molecules, and the nitrogen atoms of pyridine rings participate.3 It was also found that electronic charge can be transferred through the π stack systems of the aromatic rings. In the present paper we describe the synthesis and crystal structure of tetracyanometalates(II) (M ) Ni, Pd, and Pt) with the N,N′-alkylated derivatives of 2,2′-bipyridine, bpydq (bpy-dq ) 6,7-dihydrodipyrido[1,2-a:2′,1′-c]pyrazinium) and 1,10-phenanthroline, phen-dq (phen-dq ) 5,6-dihydropyrazino[1,2,3,4-lmn]- 1,10-phenanthrolinium). The X-ray crystal structures, thermal behavior, and vibrational study, including a theoretical analysis with density functional theory, are presented. These compounds may be used as precursors in the synthesis of radical-cation salts which could contain stacks of partially oxidized [M(CN)4]x- ions with strong overlap between the metal atoms.4 Results and Discussion Vibrational Spectra. The IR spectra are dominated by the bands of cation which change their position and intensity in comparison to the cation bromide. This can be explained by hydrogen bonding to anion. The hydrated compounds show a strong absorption in the range 3600-3100 cm-1 that certifies the existence of the O-H bonds from the water molecules. (3) Alcock, N. W.; Samotus, A.; Szklarzewicz, J. J. Chem. Soc., Dalton Trans. 1993, 885. (4) Williams, J. M.; Schultz, A. J.; Underhill A. E.; Carneiro. K. Extended Linear Chain Compounds; Miller, J. S., Ed.; Plenum Press: New York, 1982; Vol. 1, p 73 ff.

5

6

DFT

symmetry

592

617 592

618 594 551 546 511 500 463 438 397 217 200

A A A A B B B A A A B

538 502 434 394 223

539 517 503 456 433 394 221

The [M(CN)4]2- anion possesses ideally D4h symmetry and, thus, will have 16 fundamental vibrations (2 A1g, 1 A2g, 2 B1g, 2 B2g, 1 Eg, 2 A2u, 2 B2u, and 4 Eu).5 Of these, A2u and Eu are infrared active, while A1g, B1g, B2g, and Eg are Raman active. The A2g and B2u vibrations are inactive. No B2g modes were observed. To be able to assign all the bands of the tetracyanometalate anions, density functional calculations (DFT) have been carried out for all of them assuming ideal D4h symmetry. In Table 1 are listed the experimental and theoretical (DFT calculations) IR and Raman bands for the anion complexes and the most intense low-frequency region Raman bands for the diquaternary cations. The corresponding Raman spectra are shown in Figure 1. As can be seen in Table 1 the agreement for the diquaternary cations is remarkable. This fact strongly indicates that the method chosen for the calculations is good and has allowed us a better assignment of the bands corresponding to the anion complexes and to see the variation of the bands upon changing the central metallic atom. The strong absorption in IR, near 2125 cm-1, is associated with CtN stretching vibrations. The A1g and B1g CtN stretching modes are observed in the Raman spectrum between 2160 and 2120 cm-1. In the low-frequency region of the IR spectra the only observed band corresponds to νas(Pt-C), since for Ni and Pd the theoretical calculations indicate that the band is either located below 400 cm-1 (Ni) or it is very weak (Pd), making it very hard to observe. In the Raman spectra below 500 (5) (a) Kubas G. J.; Jones, L. H. Inorg. Chem. 1974, 13, 2816. (b) Nakamoto, K. Infrared and Raman Spectra of Inorganic and Coordination Compounds, Part B, 5th ed.; John Wiley & Sons: New York, 1987.

Inorganic Chemistry, Vol. 41, No. 17, 2002

4397

Vitoria et al.

Figure 1. Raman spectra of the compounds with tetracyanometalate asignations.

cm-1 the A1g and Eg M-CN group associated vibrations are observed. The most remarkable fact is the strong blue-shift of these vibrations for the Pt compound, specially the A1g one, as corroborated by the calculations (see Table 1) and in good agreement with the results for potassium salts.5 As the A1g vibration is a metal-carbon stretching one, its frequency should correlate with the strength of this bond. AIM calculations over [M(CN)4]2- anions confirm this fact and show a nice correlation between the A1g mode frequency and the value of the electron density at the M-C bond critical point, which is 0.1116, 0.1133, and 0.1270 au for M ) Ni, Pd, and Pt, respectively. Crystal Structures of Bipyridinium Derivatives: (bpydq)[M(CN)4]‚2H2O (1-3). The single-crystal structure determinations of bipyridinium derivative salts, (C12H12N2)[M(CN)4]‚2H2O (1 and 3), show that both salts are isostructural. The asymmetric unit consists of one (C12H12N2)2+ bipyridinium diquaternary cation, one [M(CN)4]2- complex anion, and two water molecules. The structures of the complex dianion and the cation with the atomic numbering scheme are shown in Figure 2a. Selected bond lengths and angles are listed in Table 2. In the [M(CN)4]2- anion the metal atom is bonded to four CN- ligands with a coordination approximately square planar. The M-C bond distances and C-M-C and M-C-N bond angles agree well with previously reported values for other Ni(II) and Pt(II) tetracyanometalates.6 The (C12H12N2)2+ bipyridinium diquaternary cation is not strictly planar. The two pyridinium rings are each very nearly planar, but the dihedral angle between the two aromatic rings is 19.5° and 19.2° for 1 and 3, respectively, due to the ethylene bridge between the nitrogen atoms. Bond distances (6) Knoepel, D. W.; Shore, S. G. Inorg. Chem. 1996, 35, 5328.

4398 Inorganic Chemistry, Vol. 41, No. 17, 2002

Figure 2. (a) ORTEP view with atom labeling for compounds 1 (Ni) and 3 (Pt). (b) Top and side view of a column with the interplanar distances.

and angles within the organic cation are comparable with those reported in the literature.7 The crystal structure of these compounds consists of columns of alternating cations and anions along the [101] direction (Figure 2b). An interesting structural feature is the stacking distance among anions and cations. Each anion is placed between two cations with the cyanide ligands sandwiched between the aromatic rings of two contiguous cations, probably due to π-π interactions (Figure 2c). The structure is stabilized by an extended hydrogen bond network of the type C-H‚‚‚N, C-H‚‚‚O, O-H‚‚‚N, and O-H‚‚‚O, involving the carbon of cations, nitrogens of cyanide anions, and water molecules. Anions and cations packed in the same column are linked via a water molecule (7) (a) Derry, J. E.; Hamor, T. A. Nature 1969, 221, 464. (b) Sullivan, P. D.; Williams, L. J. Am. Chem. Soc. 1976, 98, 1711. (c) Gutie´rrezZorrilla, J. M.; Roma´n, P.; Gleizes, A. C. R. Acad. Sci. Parı´s 1987, 305, 1353.

Tetracyanometalates of Ni, Pd, and Pt Table 2. Experimental and Theoretical Bond Lengths (Å) and Angles (deg) and Hydrogen Contacts for Bpy-dq Compounds 1-3 Ni(CN)42-

Pd(CN)42-

1

DFT

M-C1 M-C2 M-C3 M-C4 C1-N1 C2-N2 C3-N3 C4-N4

1.864(3) 1.868(3) 1.861(3) 1.878(3) 1.140(4) 1.144(5) 1.150(5) 1.138(5)

1.886

2.019

1.194

1.193

C1-M-C2 C2-M-C3 C3-M-C4 C1-M-C4 C1-M-C3 C2-M-C4 M-C1-N1 M-C2-N2 M-C3-N3 M-C4-N4

90.4(1) 88.6(1) 92.4(1) 88.7(1) 177.9(2) 178.2(1) 176.1(3) 178.7(3) 177.0(3) 178.0(3)

90

90

180

Pt(CN)42-

DFT

180

4

6

3

DFT

1.99(2) 1.97(3) 1.97(2) 2.00(3) 1.13(3) 1.17(4) 1.16(3) 1.13(4)

2.007

Ni-C1 Ni -C2 Ni -C3

1.879 (4) 1.854 (7) 1.859 (6)

1.193

C1-N1 C2-N2 C3-N3

1.133 (6) 1.142 (8) 1.140 (9)

90

C1-Ni -C2 C2-Ni-C3 C1-Ni-C3

88.4 (1) 180.0 (1) 91.6 (1)

Ni-C1-N1 Ni-C2-N2 Ni-C3-N3

177.7 (4) 180.0 (1) 180.0 (1)

90.5(1) 88.1(9) 93.1(1) 88.3(9) 178(1) 178(1) 177(2) 179(3) 177(2) 179(2)

Pt1-C1 Pt1-C2 Pt2-C3 Pt2-C4 C1-N1 C2-N2 C3-N3 C4-N4

1.992 (4) 1.996 (4) 1.992 (4) 1.989 (4) 1.127 (4) 1.135 (5) 1.135 (4) 1.149 (5)

C1-Pt1-C2 C3-Pt2-C4 C3′-Pt2-C4 Pt1-C1-N1 Pt1-C2-N2 Pt2-C3-N3 Pt2-C4-N4

90.07 (2) 89.7 (1) 90.3 (1) 178.2 (3) 177.9 (4) 177.7 (3) 178.6 (3)

180 Hydrogen Contacts 4

Hydrogen Contacts D‚‚‚A/Å donor-H‚‚‚acceptor

1

3

C12-H12‚‚‚N4a

3.446(5) 3.328(6) 3.387(5) 3.315(5) 3.241(4) 3.404(4) 3.274(5) 2.946(4) 2.834(5) 2.930(5) 2.809(6)

3.43(3) 3.39(4) 3.36(4) 3.39(3) 3.25(3) 3.41(3) 3.21(3) 2.93(3) 2.80(3) 2.92(3) 2.83(4)

C13-H13‚‚‚N1b C14-H14‚‚‚N2b C24-H24‚‚‚N4c C25-H25‚‚‚O1d C15-H15‚‚‚O1d C6-H61‚‚‚O1e O1-H111‚‚‚N1e O2-H211‚‚‚N3f O2-H212‚‚‚N2g O1-H112‚‚‚O2b

Table 3. Selected Bond Lengths (Å) and Angles (deg) and Hydrogen Bonds for Compounds 4 and 6

a 1 - x, -y, -z. b 1 + x, y, z. c -1/ + x, 1/ - y, 1/ + z. d -1/ + x, 1/ 2 2 2 2 2 - y, -1/2 + z. e 1 - x, -y, 1 - z. f 1/2 - x, -1/2 + y, 1/2 - z. g 1/2 + x, 1/2 - y, 1/2 + z.

6

donor-H‚‚‚acceptor

D...A/Å

donor-H‚‚‚acceptor

D...A/Å

C12-H12‚‚‚N1a,b

3.428 (6) 3.247 (5) 3.378 (6) 3.250 (5) 3.477 (6) 3.369 (7) 3.471 (7)

C22-H22‚‚‚O1 C23-H23‚‚‚N2 C28-H281‚‚‚O1 O1-H1‚‚‚N3 O1-H2‚‚‚N1 C24-H24‚‚‚N3m C27-H27‚‚‚N1n C13-H13‚‚‚N3o C18-H181‚‚‚N2p

3.183 (6) 3.274 (7) 3.433 (5) 3.048 (5) 3.064 (4) 3.499 (6) 3.363 (5) 3.318 (5) 3.348 (5)

C13-H13‚‚‚N2a-d C18-H181‚‚‚N1a,b C13-H13‚‚‚N3e-h C17-H17‚‚‚N1e,f C18-H182‚‚‚N3i-l C18-H182‚‚‚N2

a 1 - x, 1 - y, -z. b 1/ + x, 1 - y, - z. c 1/ + x, 1 - y, -1/ + z. d 1 2 2 2 - x, 1 - y, -1/2 + z. e 1 - x, - y, - z. f 1/2 + x, - y, - z. g 1/2 + x, - y, 1 h 1 i j 1 - /2 + z. 1 - x, - y, - /2 + z. x, 1 + y, z. /2 - x, 1 + y, z. k 1/2 - x, 1 + y, 1/2 - z. l x, 1 + y, 1/2 - z. m 1 - x, 1 - y, 1 - z. n 1 - x,1/2 + y, 1/ - z. o 1 + x, 1/ - y, -1/ + z. p 1 - x, -1/ + y, 1/ - z. 2 2 2 2 2

Table 4. Properties of the Critical Points in the Electron Density for Compounds 1 and 4 (bpy-dq)[Ni(CN)4]‚2H2O (1)

with hydrogen contacts of the type C6-H61‚‚‚O1 and O1H111‚‚‚N1. Ions belonging to different columns are linked by hydrogen contacts of the type C-H‚‚‚N and hydrogen bonds involving the water molecules. Details of the Hbonding network are listed in Table 2. In the case of compound 2, high-quality crystals were not obtained. The X-ray diffraction pattern of the microcrystalline product was performed in the 2θ range between 5° and 70°. Indexation of the diffraction profile and refinement of the cell parameters and the atomic coordinate of palladium were made by FULLPROF,8 on the basis of the space group P21/n and the structural model found for compound 3. The obtained parameters are described in Table 5. From these data, we can consider the three phases to be isostructural. Crystal Structures of Phenanthrolinium Derivatives: (phen-dq)[Ni(CN)4] (4). The asymmetric unit of phenanthrolinium derivative anhydrous salt (C14H12N2)[Ni(CN)4], 4, consists of one phenanthrolinium diquaternary cation, (C14H12N2)2+, and one [Ni(CN)4]2- complex anion. Figure 3a shows the structures of the complex dianion and the cation with the atomic labeling scheme. Selected bond lengths and angles are listed in Table 3. The Ni-C bond (8) Rodriguez-Carvajal, J. FULLPROF, Physica 1992, 192, 55.

critical pointa

from f tob

Fc

∇2F d

e

type

1 2 3 4 5

C4 to C15-H15 bcp C3 to C15 N2 to N21 C2 to C26 N3 to H62

0.00501 0.00660 0.00588 0.00553 0.00199

0.01624 0.01864 0.01828 0.01624 0.00756

4.070 0.558 6.530 0.924 0.196

π-π π-π π-π π-π HB (vw)

(phen-dq)[Ni(CN)4] (4) critical point

from f to

F

L



type

1 2 3 4 5

Ni to C17-C17 bcp N1 to C14 N2 to C16-C16 bcp N1 to C14 N2 to H182

0.00625 0.00469 0.00678 0.00468 0.00856

0.02280 0.01360 0.01912 0.01360 0.02736

1.467 2.622 1.680 2.294 0.068

π-π π-π π-π π-π HB (vw)

a Labels of critical points as in Figure 5. b Bond path. c Electronic density (au). d Laplacian. e Ellipticity.

distances and C-Ni-C and Ni-C-N bond angles agree well with values previously reported for other tetracyanonickelates.6 In the (C14H12N2)2+ phenanthroline diquaternary cation the aromatic rings are coplanar and lie on a crystallographic mirror plane. There is another crystallographic mirror perpendicular to the molecule. The C18 atom, which is placed 0.393 Å out of the molecular mean plane, is Inorganic Chemistry, Vol. 41, No. 17, 2002

4399

Vitoria et al. Table 5. Crystal Data and Details of the Structure Determination of Compounds (bpy-dq)[M(CN)4]‚2H2O formula fw cryst syst space group a/Å b/Å c/Å β/deg V/Å3 Z Dx/g‚cm-3 µ(Mo KR)/cm-1 reflns collected obsd reflns R wR(F) RB RWP

1a

2b

3a

C16H12N6Ni‚2H2O 383.04 monoclinic P21/n (no. 14) 9.223(1) 15.689(2) 12.161(4) 102.39(2) 1718.7(6) 4 1.480 11.534 5009 3143 0.043 0.052

C16H12N6Pd‚2H2O 430.76 monoclinic P21/n (no. 14) 9.183(1) 15.860(1) 12.403(1) 103.54(5) 1755.9(3) 4

C16H12N6Pt‚2H2O 519.431 monoclinic P21/n (no. 14) 9.147(1) 15.847(6) 12.511(2) 104.04(2) 1759.3(8) 4 1.961 79.98 5092 2069 0.058 0.062

303 7.79 12.0

(phen-dq)[M(CN)4]‚nH2O, (n ) 0, 1) formula fw cryst syst space group a/Å b/Å c/Å β/deg V/Å3 Z Dx/g‚cm-3 µ(Mo KR)/cm-1 reflns collected obsd reflns R wR(F2) RB RWP a

4a

5bb

5b

6a

C18H12N6Ni 371.05 orthorhombic Pmnm (no. 59) 6.555(2) 9.426(2) 12.436(2)

C18H12N6Pd 418.75 orthorhombic Pmnm (no. 59) 6.669(2) 9.586(2) 12.495(2)

768.4(3) 2 1.604 1.276 1259 830 0.0460 0.1354

798.8(3) 2

C18H12N6Pd‚H2O 436.76 monoclinic P21/n (no. 14) 8.603(2) 14.717(3) 14.959(3) 108.88(1) 1786.0(6) 4

144

161

C18H12N6Pt‚H2O 525.438 monoclinic P21/c (no. 14) 9.928(2) 14.754(2) 12.046(4) 100.98(1) 1732.2(7) 4 2.015 8.121 5029 2441 0.0336 0.0968

3.57 14.4

2.07 16.1

Single-crystal X-ray diffraction analysis. b Powder X-ray diffraction data.

disordered over four positions due to the above-mentioned crystallographic symmetry. Bond distances and angles within the diquaternary cation are comparable with those reported in the literature.9 The crystal structure is a bidimensional framework constructed from parallel layers located at two different x levels, x ) 0.25 and 0.75. Each anion is surrounded by four cations and connected by eight C-H‚‚‚N hydrogen bonds (Figure 3b). As can see in Figure 3c, the tetracyanonickelate complexes are sandwiched by two diquaternary cations at a distance of 3.227 Å, denoting a kind of π-π interaction. Anhydrous compounds 5b and 6b were thought to be isostructural to the previously described compound. X-ray powder diffraction patterns were taken for both as highquality crystals were not obtained. Rietveld profile refinement was performed for 5b with the FULLPROF8 program (pattern matching analysis), on the basis of the orthorhombic cell, space group Pmnm, and the cell parameters found for compound 4. Taking into account the obtained values, which are given in Table 5, it can be deduced that it is in fact (9) Summers, L. A. Tetrahedron 1968, 24, 5433.

4400 Inorganic Chemistry, Vol. 41, No. 17, 2002

isostructural. On the other hand, the profile refinement of the diffraction pattern for compound (C14H12N2)[Pt(CN)4], 6b, has not yielded good results. It seems that the compound presents a great tendency to hydration and that some of the diffraction peaks correspond to the hydrated phase. Further treatments with high-temperature diffraction have not yielded a unique nonhydrated phase. (phen-dq)[M(CN)4]‚H2O [M ) Pd, Pt] (5, 6). The singlecrystal structure determination of 5,6-dihydropyrazino[1,2,3,4lmn]-1,10-phenanthrolinium tetracyanoplatinate, (C14H12N2)[Pt(CN)4]‚H2O, 6, shows that the asymmetric unit consists of two centrosymmetric [Pt(CN)4]2- complex anions: one diquaternary phenanthrolinium dication and one water molecule. For the palladium compound 5, as high quality crystals were not obtained, X-ray powder diffraction data were used to obtain structural information. The space group found for compound 6 and unit cell parameters obtained by DICVOL9110 have been used to perform the pattern matching analysis. The calculated values are present in Table 5. Figure 4a shows the structures of the complex dianion and the cation with the atomic numbering scheme. Selected bond (10) Boultiff, A.; Louer, D. J. Appl. Crystallogr, 1991, 24, 987.

Tetracyanometalates of Ni, Pd, and Pt

Figure 3. Compound 4: (a) ORTEP view with atom labeling, (b) Arrangement in a shell (x ) 0.25) showing the hydrogen bonding network. (c) Top and side view of the π-π interactions.

lengths and bond angles are listed in Table 3. The Pt-C bond distances and C-Pt-C and Pt-C-N bond angles agree well with values previously reported for other tetracyanoplatinates.6 The (C14H12N2)2+ phenanthroline diquaternary cations are not planar and the dihedral angles between the aromatic rings range from 3.30° to 9.87°. Bond distances and angles within the organic cation are comparable with those reported in the literature.9 The crystal structure consists of columns of alternating cations and anions along the [101] direction (Figure 4b). Each anion is placed between two cations at 3.47 and 3.51 Å, with the cyanide ligands sandwiched between the aromatic rings of two contiguous cations. In this case cation and anions are not as parallel as in the previous compounds, the angle between the mean planes of the anion and the cation being 7.55° for Pt1 and 11.10° for Pt2.

Figure 4. Compound 6: (a) ORTEP view of an asymmetrical unit together with atom labeling showing the water molecule environment. (b) Top and side view of a column with the interplanar distances.

Intermolecular Weak Interactions. The possible presence of intermolecular weak interactions was studied through the analysis of the charge density by using the theory of atoms in molecules (AIM),11 which has been shown, both in experimental and theoretical studies, to be able to highlight the dominant interactions which contribute to weak binding forces.12 Calculations have been performed on the nickel compounds 1 and 4, using the crystallographically determined geometries. The system studied in compound 1 includes a tetracyanonickelate anion sandwiched between two bipyridine diquaternary cations and seven water molecules, whereas for the centrosymmetric compound 4 just the tetracyano(11) Bader, R. F. W. Atoms in molecules-A quantum theory; International Series of Monographs on Chemistry, No. 22; Oxford University Press: Oxford, UK, 1990. (12) Bone, R. G. A.; Bader, R. F. W. J. Phys. Chem. 1996, 10, 10892.

Inorganic Chemistry, Vol. 41, No. 17, 2002

4401

Vitoria et al.

Figure 6. Display of an envelope of the electron density in compound 4 for a value equal to 0.0046 au, the minimum electron density at the intermolecular bond critical points.

Figure 5. Molecular graphs determined by the topology of the electron density for (a) compound 1 (for clarity the water molecules and one of the diquaternary cations are not displayed) and (b) compound 4. Positions of the bond and ring CPs are denoted by dark and light gray dots, respectively. The cage CP is labeled as ccp.

nickelate anion and one phenantroline diquaternary cation were included. In both cases, besides the bond critical points (CP) in the charge density corresponding to the intramolecular bonds, several bond CPs appear connecting the anions and cations (Figure 5) and in compound 1 it is possible to find critical points corresponding to hydrogen bonds of the water molecules. The value of the charge density at all these intermolecular critical points is quite small (∼10-3 au) and the Laplacian is small and positive, which is indicative of a closed-shell interaction and, in the particular case of these compounds, of π-π interactions between the cyano groups of one of the [Ni(CN)4]2- anions and the aromatic rings of the cations. In fact, the intermolecular atomic interaction lines connect CN nitrogen atoms to either an atom or a C-C bond CP of the aromatic rings. The properties of the charge density at the intermolecular CPs listed in Table 4. To satisfy the Poincare´-Hopf relationship: n - b + r c ) 1 (where n is the number of nuclei and b, r, and c are the number of bond, ring, and cage CPs, respectively), five ring and one cage CPs appear between each anion and cation. As the bond CPs display a curvature of the charge density much smaller in the direction normal to the bond path than along it, the magnitude of the electron density at the ring and bond CPs is similar, which creates a region of almost constant electron density between the anion and cation (Figure 6).

4402 Inorganic Chemistry, Vol. 41, No. 17, 2002

Thermogravimetric Analysis. The thermogravimetric curves indicate that the thermal decompositions are not simple, because most of the stages are overlapped. This fact together with the great diversity of possible intermediate products preclude exhaustive interpretations and only the final inorganic degradation residues have been identified by X-ray powder diffraction techniques. Thermal decomposition shows that compounds 1-3 are dihydrated, compound 4 is anhydrous, and compounds 5 and 6 are monohydrated. The water molecules are lost between 50 and 105 °C during an endothermic step for compounds 1, 2, 5, and 6, and two steps for 3. The anhydrous compounds are stable up to 240, 235, 275, 275, 250, and 300 °C, respectively. The decomposition of these anhydrous compounds starts with an exothermic step followed by one progressive weight loss to give a residue that could contain a small amount of the corresponding metal fulminate,13 whose presence may be guessed from the strongly exothermic character and abrupt weight loss of the next decomposition stage. This last stage gives stable residues at 405 (1), 450 (2), 460 (3), 365 (4), 384 (5), and 426 °C (6). In all cases, the final residue is a mixture of metal and metal oxide. In the case of compound 4 these three steps overlap. For the salts of the tetracyanopalladate anion, 2 and 5, a progressive mass gain is observed above 450 °C, due to the oxidation of Pd to yield PdO. Conclusions Six new tetracyanometalate compounds of group 10 have been obtained from the reaction of aqueous solutions of the [M(CN)4]2- anion and the (C12H12N2)2+ or (C14H12N2)2+ diquaternary cations. The three compounds of the bipyridinium diquaternary cation are dihydrated and isostructural. The compounds with the phenanthrolinium diquaternary cation present two different degrees of hydration: the nickel compound is anhydrous and the palladium and platinum compounds are monohydrated. DFT calculations of the IR and Raman spectra present good agreement, in values and tendencies, with the experi(13) Sharpe, A. G. ComprehensiVe Coordination Chemistry; Wilkinson, G., Ed.; Pergamon Press: London, UK, 1987; Vol. 2, p 7 ff.

Tetracyanometalates of Ni, Pd, and Pt

mental data. The agreement for the diquaternary cations is remarkable. The strong peaks between 2100 and 2200 cm-1, associated with CtN stretching vibrations, show a blue-shift when going from Ni to Pd, and less so from Pd to Pt. A strong blue-shift is also observed for the M-C stretching band, but in this case it is larger for the platinum compounds, as corroborated by the DFT calculations. The diquaternary cation used determines the hydration degree and, consequently, the packing model of these compounds. Thus, all three bipyridinium derivatives are dihydrated and isostructural, showing a columnar structure that favors π-π interactions between cyanide ligands of [M(CN)4]2- anions and the aromatic rings of diquaternary cations. Meanwhile, the phenanthrolinium derivatives present different degrees of hydration depending on the metal atom. The nickel salt is anhydrous, and the palladium and platinum salts are monohydrated. The corresponding anhydrous salts present a gradual decrease of stability when going from nickel to platinum: both palladium and platinum monohydrated salts can be dehydrated at 125 °C, but the platinum salts rehydrate immediately. The anhydrous salts show a bidimensional framework, which suggest the presence of π-π interactions between cyanide ligands of [M(CN)4]2- anions and the aromatic rings of diquaternary cations. The DFT calculations performed on nickel compounds 1 and 4 demonstrate the presence of weak interactions between the cyano groups and the aromatic rings. The most remarkable fact of the thermal behavior of these compounds is the abrupt and extremely exothermic nature of the last decomposition step (350-450 °C). The temperature range of this step gets narrower as the nobleness of metal increases and it is much narrower for the phenanthrolinium compounds than the bipyridinium compounds. Experimental Section General. Potassium tetracyanometalate(II) (M ) Ni, Pd, and Pt), 2,2′-bipyridine, and 1,10-phenanthroline monohydrate were purchased as reagent grade and were used without further purification. The synthesis of 6,7-dihydrodipyrido[1,2-a:2′,1′-c]pyrazinium dibromide, (C12H12N2)Br2,14 and 5,6-dihydropyrazino[1,2,3,4-lmn]1,10-phenanthrolinium dibromide, (C14H12N2)Br2,9 was carried out according to literature methods. The content of water was determined thermogravimetrically (TG). Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were carried on a Setaram Tag 24 S16 thermobalance under a 50 mL/min flow of synthetic air; the temperature was ramped from 20 to 600 °C at a rate of 5 deg/min. The infrared spectra were recorded on a Nicolet Magna FT-IR 550 spectrophotometer for KBr pellets in the 4000400 cm-1 region. Raman spectra were recorded on a NICOLET 950 FT equipped with a laser Spectra Physics Nd: YVO4 (1064 nm, 1.5 W). Carbon, nitrogen, and hydrogen were determined by organic microanalysis on a LECO CHNS 932 analyzer. Synthesis. The complexes were prepared according to the following general procedure: To a well-stirred aqueous solution containing 1.10 mmol of K2[M(CN)4] was added a 1.10 mmol aqueous solution of (dq)Br2‚H2O at room temperature. Immediately, an insoluble microcrystalline powder was obtained. The resulting (14) Homer, R. F.; Tomlison, T. E. J. Chem. Soc. 1960, 2498.

precipitate was filtered off, washed with water, acetone, and ethyl ether, and dried in air via suction. Approximately 85% yields were achieved for all complexes. The details of each particular synthesis are given below. (C12H12N2)[Ni(CN)4]‚2H2O (1). The yellow precipitate was recrystallized in cold water to give yellow needles suitable for single-crystal X-ray investigations. (Found: C, 50.60; H, 4.21; N, 21.81; C16H16N6NiO2 requires C, 50.17; H, 4.21; N, 21.94.) (C12H12N2)[Pd(CN)4]‚2H2O (2). The brown precipitate was recrystallized in cold water to give a polycrystalline material. (Found: C, 45.21; H 3.77; N 19.60; C16H16N6O2Pd requires C, 44.61; H, 3.74; N, 19.51.) (C12H12N2)[Pt(CN)4]‚2H2O (3). The yellow precipitate was recrystallized in cold water to give yellow prismatic crystals suitable for X-ray investigations. (Found: C, 36.77; H 3.08; N 16.27; C16H16N6O2Pt requires C, 37.00; H, 3.10; N, 16.18.) (C14H12N2)[Ni(CN)4] (4). The orange precipitate was recrystallized in cold water to give yellow-red crystals suitable for X-ray investigations. (Found: C, 58.28; H 3.16; N 22.36; C18H12N6Ni requires C, 58.27; H, 3.26; N, 22.65.) (C14H12N2)[Pd(CN)4]‚H2O (5). The red-orange precipitate was recrystallized in cold water to give a polycrystalline material. (Found: C, 49.39; H 3.26; N 19.12; C18H14N6OPd requires C, 49.5; H, 3.23; N, 19.24.) (C14H12N2)[Pt(CN)4]‚H2O (6). The red precipitate was recrystallized in cold water to give a polycrystalline material. Single crystals suitable for X-ray study were grown by slow diffusion of aqueous solutions of the reactives (dq)Br2‚H2O and K2[Pt(CN)4]. (Found: C, 41.05; H 2.51; N 16.05; C18H14N6OPt requires C, 41.15; H, 2.69; N, 15.99.) (C14H12N2)[Pd(CN)4] (5b). A sample of 40 mg of compound 5 was dehydrated in the thermobalance, raising the temperature to 125 °C and keeping it there for 30 min to obtain a dark yellow powder. (C14H12N2)[Pt(CN)4] (6b). A sample of 16 mg of compound 6 was dehydrated in the thermobalance, raising the temperature to 125 °C and keeping it there for 15 min to obtain a dark yellow powder. This dehydrated compound is very unstable and rehydrates almost immediately, preventing any experimental characterization. X-ray Diffraction Analysis. Single-crystal X-ray data collection for compounds 1, 3, 4, and 6 was carried out at 293 K on a EnrafNonius CAD-4 four-circle diffractometer with graphite-monochromated Mo KR radiation (λ ) 0.71069 Å) and operating in the ω-2θ scan mode. Unit cell parameters were determined from a leastsquares fit of 25 well-centered reflections on the range 9 < θ < 13 for 1 and 7 < θ < 14 for 3, 7 < θ < 12 for 4, and 8 < θ < 13 for 6. Intensities of two reflections monitored periodically exhibited no significant variation. The intensity data were corrected for Lorentz and polarization effects. Crystallographic details for all compounds are given in Table 5. An empirical absorption correction was applied to data following the procedure DIFABS,15 resulting in transmission factors ranging from 0.951 to 1.064 for 1, 0.962 to 1.027 for 3, 0.1546 to 0.8484 for 4, and 0.0651 to 0.2894 for 6. The atomic scattering factors for neutral atoms and anomalous dispersion corrections for nonhydrogen atoms were taken from the International Tables for X-ray Crystallography.16 (15) Walker, N.; Stuart, D. Acta Crystallogr, 1983, A39, 158. (16) International Tables for Crystallography; Kluwer Academic Publishers: Dordrecht, The Netherlands, 1996.

Inorganic Chemistry, Vol. 41, No. 17, 2002

4403

Vitoria et al. The structures were solved by a combination of Patterson and difference Fourier methods17 and refined by full-matrix leastsquares.18 A convenient weighting scheme was used to obtain flat dependence in 〈w∆2F〉 vs 〈Fo〉 and 〈sin θ/λ〉.19 In all compounds, non-hydrogen atoms were refined anisotropically. Hydrogen atoms in compound 1 were located in a difference Fourier map and refined isotropically. For compound 3 the hydrogen atoms were introduced in the final refinement in calculated positions as fixed isotropic contributors (U ) 0.05 Å2). For compounds 1 and 3 most calculations were carried out with the X-RAY76 System20 running on a MicroVAX II computer and for compounds 4 and 6 the calculations were carried out with WINGX21 running on a personal computer. Final atomic positional and thermal parameters, together with anisotropic thermal parameters for non-hydrogen atoms, a full list of bond distances and angles, dihedral angles, and a list of observed and calculated structure factors, have been deposited as Supporting Information. Atomic coordinates have also been submitted to the Cambridge Crystallographic Data Centre. Compounds 2 and 5 crystallize in insufficient quality to be studied by X-ray single-crystal diffraction and powder X-ray diffraction has been performed to obtain structural information. The X-ray powder diffraction (XRD) patterns for compounds 2, 5, 5b, and 6 were recorded on a STOE automatic diffractometer, equipped with germanium monochromated Cu KR1 radiation. An ω-2θ scan was performed in the 2θ range 5 < 2θ < 80° with increments of 0.02(2)° and a fixed-time counting of 12 s. Indexation of the diffraction profile and refinement of the cell parameters were made by FULLPROF (pattern-matching analysis)8 on the basis of the space group and the cell parameters found for the isostructural compounds. DFT Calculations. The geometry of the tetracyanometalate anions [M(CN)4]2- in D4h symmetry and diquaternary cations in C2V symmetry was optimized starting from experimental values and their fundamental vibrations were calculated by using Density Functional Theory as implemented in the program Gaussian 98W.22 Becke’s three-parameter hybrid functional with the PW91 correla(17) Beurskens, P. T.; Beurskens, G.; Bosman, W. P.; de Gelder, R.; GarciaGranda, S.; Gould, R. O.; Israel R.; Smits, J. M. M. DIRDIF96 program system; Crystallography Laboratory, University of Nijmegen: Nijmegen, The Netherlands, 1996. (18) Sheldrick, G. M. SHELX97, Programs for Crystal Structure Analysis (Release 97-2); Institu¨t fu¨r Anorganische Chemie der Universita¨t: D-3400 Go¨ttingen, Germany, 1998. (19) Martı´nez-Ripoll, M.; Cano, F. H. Programa PESOS; Instituto Rocasolano, CSIC: Madrid, Spain, 1975. (20) Stewart, J. M.; Machin, P. A.; Dickinson, C. W.; Ammon, H. L.; Heck, H.; Flack, H. The XRAY76 System; Technical report TR-446; Computer Science Center, University of Maryland: College Park, Maryland, 1976. (21) Farrugia, L. J. J. Appl. Crystallogr. 1999, 32, 837.

4404 Inorganic Chemistry, Vol. 41, No. 17, 2002

functional23

(B3PW91) was used in all calculations. The Los tion Alamos effective core potential combined with a DZ basis (LANL2DZ)24 was chosen for the transition metals, as a compromise between accuracy and computational power available. For the remaining atoms, the 6-31G* basis25 was used, supplemented with a set of diffuse functions in the case of the [M(CN)4]2- anions. The assignment of the calculated wavenumbers was aided by the animation option of the Molden 3.626 and MOLDRAW 1.027 programs that give a visual presentation of the shape of the vibrational modes. The same theoretical level and basis sets were used to calculate the electron density in the systems, including a tetracyanonickelate anion sandwiched between two bipyridine diquaternary cations and seven water molecules for compound 1, and the tetracyanonickelate anion and one phenantroline diquaternary cation for compound 4. The location and properties of the critical points of the electron density were analyzed with AIM2000.28

Acknowledgment. This work was supported by MEC (Grant No. PB98/0238). Supporting Information Available: Crystallographic data in CIF format for compounds 1, 3, 4, and 6; powder XRD data for compounds 2, 5, and 5b; and graph of the correlation between the A1g mode frequency and the value of the electron density at the M-C bond critical point. This material is available free of charge via the Internet at http://pubs.acs.org. IC0200287 (22) Frisch, M. J.; Trucks, G. W.; Schlegel, H. B.; Scuseria, G. E.; Robb, M. A.; Cheeseman, J. R.; Zakrzewski, V. G.; Montgomery, J. A.; Stratmann, R. E.; Burant, J. C.; Dapprich, S.; Millam, J. M.; Daniels, A. D.; Kudin, K. N.; Strain, M. C.; Farkas, O.; Tomasi, J.; Barone, V.; Cossi, M.; Cammi, R.; Mennucci, B.; Pomelli, C.; Adamo, C.; Clifford, S.; Ochterski, J.; Petersson, G. A.; Ayala, P. Y.; Cui, Q.; Morokuma, K.; Malick, D. K.; Rabuck, A. D.; Raghavachari, K.; Foresman, J. B.; Cioslowski, J.; Ortiz, J. V.; Stefanov, B. B.; Liu, G.; Liashenko, A.; Piskorz, P.; Komaromi, I.; Gomperts, R.; Martin, R. L.; Fox, D. J.; Keith, T.; Al-Laham, M. A.; Peng, C. Y.; Nanayakkara, A.; Gonzalez, C.; Challacombe, M.; Gill, P. M. W.; Johnson, B. G.; Chen, W.; Wong, M. W.; Andres, J. L.; Head-Gordon, M.; Replogle E. S.; Pople, J. A. Gaussian 98W, Revision A.7; Gaussian, Inc.: Pittsburgh, PA, 1998. (23) Becke, A. D. J. Chem. Phys, 1993, 98, 5648. (24) (a) Hay, P. J.; Wadt, W. R. J. Chem. Phys. 1985, 82, 270. (b) Wadt W. R.; Hay, P. J. J. Chem. Phys. 1985, 82, 284. (c) Hay, P. J.; Wadt, W. R. J. Chem. Phys. 1985, 82, 299. (25) (a) Ditchfield, R.; Hehre W. J.; Pople, J. A. J. Chem. Phys. 1971, 54, 724. (b) Hehre, W. J.; Ditchfield, R.; Pople, J. A. J. Chem. Phys. 1972, 56, 2257. (c) Hariharan, P. C.; Pople, J. A. Mol. Phys. 1974, 27, 209. (d) Gordon, M. S. Chem. Phys. Lett. 1980, 76, 163. (e) Hariharan, P. C.; Pople, J. A. Theo. Chim. Acta 1973, 28, 213. (26) Schaftenaar, G.; Noordik, J. H. J. Comput.-Aided Mol. Des. 2000, 14, 123. (27) Ugliengo, P.; Viterbo, D.; Chiari G. Z. Kristallogr. 1993, 207, 9. (28) Biegler-Ko¨nig, F.; Scho¨nbohm, J.; Bayles, D. J. Comput. Chem. 2001, 22, 545.