Tungsten Carbide Hollow Microspheres with Robust and Stable

Feb 26, 2019 - Continuously, the HER performance of W2C-HS was tested in alkaline and neutral ...... A 2015, 3, 1863– 1867, DOI: 10.1039/c4ta05686h...
1 downloads 0 Views 6MB Size
Download PDF
This is an open access article published under a Creative Commons Attribution (CC-BY) License, which permits unrestricted use, distribution and reproduction in any medium, provided the author and source are cited.

Article Cite This: ACS Omega 2019, 4, 4185−4191

http://pubs.acs.org/journal/acsodf

Tungsten Carbide Hollow Microspheres with Robust and Stable Electrocatalytic Activity toward Hydrogen Evolution Reaction Ying Ling,† Fang Luo,† Quan Zhang,† Konggang Qu,‡ Long Guo,† Hao Hu,† Zehui Yang,*,† Weiwei Cai,*,† and Hansong Cheng† †

Downloaded via 185.101.71.133 on February 27, 2019 at 14:55:09 (UTC). See https://pubs.acs.org/sharingguidelines for options on how to legitimately share published articles.

Sustainable Energy Laboratory, Faculty of Materials Science and Chemistry, China University of Geosciences Wuhan, 388 Lumo RD, Wuhan 430074, China ‡ School of Chemistry and Chemical Engineering, Liaocheng University, Liaocheng 252059, China S Supporting Information *

ABSTRACT: Here, we report a stable tungsten carbide hollow microsphere (W2C-HS) electrocatalyst with robust electrocatalytic activity toward hydrogen evolution reaction fabricated from carburization of tungsten oxides at 700 °C with CH4/H2 flow, which demands overpotentials of 153 and 264 mV to deliver 10 and 100 mA cm−2 ascribing to the hollow structures beneficial for interfacial charge transfer as well as releasing of hydrogen molecular. Meanwhile, the W2C-HS electrocatalyst exhibits undetectable degradation after 20 000 potential cycles indicative of extraordinary durability; in contrast, overpotential@100 mA cm−2 is dramatically increased from 128 to 251 mV after only 2000 potential cycles for benchmark platinum electrocatalyst.

■

tailor the electronic structure of Mo33−35 or W36,37 resulting in a suitable interaction between H* and active sites, and hybridization with carbon materials to improve its electronic conductivity.38−40 However, these TMCs only possessed low overpotentials for delivering a catalytic current density of 10 mA cm−2, which is far from the commercialization of watersplitting requiring massive H2 production at a high current density above 100 mA cm−2.41 It is generally accepted that electrocatalysts with porous structures facilitated the diffusion of active species as well releasing of generated products;42 thus, a porous electrocatalyst is favorable for boosting HER performance at high current density because the substantially produced H2 bubbles could be efficiently removed, resulting in less coverage of active sites and degradation in electronic conductivity. Motivated by the above-mentioned consideration, here, we synthesized novel tungsten carbide hollow microspheres (W2C-HS) as HER electrocatalysts by carburization of tungsten oxide fabricated via the solvothermal method reported by Sun et al.43 The W2C-HS electrocatalyst could efficiently produce H2 at high current density owing to its hollow structures as schematically shown in Figure 1a. To the best of our knowledge, this is the first report on using tungsten carbide with hollow microsphere structures as an HER electrocatalyst.

INTRODUCTION Exploration of an efficient hydrogen evolution reaction (HER) electrocatalyst has been tremendously carried out because of the ever-increasing environmental pollution as well as shortage in traditional fossil fuels.1−3 It has been proved that platinum exhibits the most efficient HER electrocatalytic activity, which is applicable as the cathodic electrocatalyst in the current water-splitting technology. For large-scale industrial commercialization of water-splitting, development in an efficient and cost-effective HER electrocatalyst as a substitution of Pt electrocatalyst is of paramount desirability.4−7 Intensive attention has been paid to transitional-metal sulfides,1,8,9 carbides,10−12 nitrides,13−15 phosphides,16−21 oxides,22−25 and selenides26,27 because the strong interaction between the transition metal and H* could be loosened after the incorporation of the above-mentioned elements, resulting in a neither too strong nor too weak interaction between the electrocatalyst with H* triggering efficient hydrogen evolution.28 Transition-metal carbides (TMCs), especially molybdenum carbide (MoxC) and tungsten carbide (WxC), have been investigated as HER electrocatalysts because a new d band of molybdenum or tungsten on the surface appears after combination with carbon, which was similar to the Pt d band suggesting that the exterior TMCs possessed analogous electronic structures compared to Pt and a comparable electrocatalytic activity to Pt was predicted.29 Robust HER activity of TMCs was variously achieved via morphology design to create more active sites,30−32 heteroatom doping to © 2019 American Chemical Society

Received: December 9, 2018 Accepted: January 31, 2019 Published: February 26, 2019 4185

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191

ACS Omega

Article

Figure 1. (a) Schematic illustration of synthetic routine of the W2C-HS electrocatalyst. (b) XRD patterns of WO3, WO2, W, W2C, and WC electrocatalysts. (c) N2 adsorption/desorption isothermal curves of WO3, W2C, and WC electrocatalysts.

Figure 2. SEM images of WO3-HS (a) and W2C-HS (b) electrocatalysts. (c) TEM image of the W2C-HS electrocatalyst and HR-TEM image as an inset. Deconvoluted W 4f spectra of WO3-HS (d), W2C-HS (e), and WC-HS (f) electrocatalysts.

■

RESULTS AND DISCUSSION The as-synthesized WO3 precursor was fabricated via a solvothermal process of sodium tungstate dihydrate (Na2WO4) and oxalic acid in water/isopropanol reported by Sun et al.43 Subsequently, WO3 was carburized at various temperatures. In order to identify the structures of the electrocatalysts prepared at different temperatures, X-ray diffraction (XRD) test was carried out and the related XRD patterns are shown in Figure 1b, in which the XRD pattern of the WO3 precursor was in good agreement with the standard PDF card of WO3 (JCPDS: 32-1395) because the peaks

appeared at 23° and 24° attributed to the (020) and (200) planes of WO3. Diffraction peaks at 26° and 37° were the (011) and (200) planes of WO2 (JCPDS: 32-1393), indicating that WO3 was transferred to WO2 after heating to 600 °C under a CH4/H2 atmosphere well agreed with the previous report.44 When the temperature was increased to 650 °C, WO2 was further reduced to metallic W proved by the observed diffraction peaks at 40°, 58°, and 73° originating from the (110), (200), and (211) facets of metallic W (JCPDS: 040806). The carburization started at 700 °C and W2C was formed as characteristic diffraction peaks at 39°, 34°, and 38° 4186

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191

ACS Omega

Article

Figure 3. LSV curves (a), double-layer capacitances (b), Tafel slopes (c), and EIS (d) of WO3-HS, WO2-HS, W-HS, W2C-HS, and WC-HS electrocatalysts. HER performances of Pt/C (e) and W2C-HS (f) electrocatalysts with different rotation speeds.

peaks at high binding energies of 37.7 and 35.5 eV were due to the unavoidable exterior oxidation of W2C exposed to air.47 Also, W 4f peaks centered at 37.8 and 35.5 eV, indicating the successful formation of WC-HS as shown in Figure 2f. Additionally, the C 1s peak of W2C-HS was observed and peaks at 283.2, 284.5, and 286.5 eV were assigned to the C−W, CC, and C−O bonds in electrocatalysts (Figure S2), which was also an indication of successful formation of W2C-HS. Electrocatalytic activity toward HER was evaluated in N2 deoxygenated 0.5 M H2SO4 electrolyte with a catalyst loading of 0.285 mg cm−2. As shown in Figure 3a, benchmark Pt/C with low overpotentials of 31 and 128 mV to achieve catalytic current densities of 10 and 100 mA cm−2. Not surprisingly, WO3-HS, WO2-HS, and W-HS exhibited low electrocatalytic activity toward HER with overpotentials 558, 261, and 297 mV to deliver a cathodic current density of 10 mA cm−2. W2C-HS required 153 and 264 mV to attain 10 and 100 mA cm−2, respectively. W2C-HS exhibited a better HER performance compared to WC-HS as hydrogen ions strongly adsorbed on the WC-HS surface owing to a lower ΔGH (Gibbs free energy of hydrogen adsorption) of −0.56 eV compared to the W2CHS (−0.31 eV) reported by Li et al.48 A highly active HER electrocatalyst should have ΔGH close to 0 eV, representing a neither too strong nor too weak interaction between hydrogen ions and active sites. Besides, W2C-HS outperformed most of the WxC-based electrocatalysts, for instance, WC/CNT,49 W4MoC nanowire,36 W2C@WC,50 and WC.51 In order to confirm the high HER activity of the W2C-HS electrocatalyst, the HER activity was conducted in H2-saturated electrolyte shown in Figure S3, in which a comparable linear sweep voltammetry (LSV) curve was obtained for the W2C-HS electrocatalyst. To quantitatively analyze the active sites of the obtained electrocatalysts, the electrochemical surface areas (ECSAs) calculated from the double-layer capacitances (Figure S4) were 21.1, 37.5, 43.9, 88.3, and 12.5 mF cm−2 for WO3HS, WO2-HS, W-HS, W2C-HS, and WC-HS (Figure 3b), respectively, in good agreement with the order of HER performance. It should be noted that the double-layer

were identified to (102), (002), and (200) planes of W2C according to the standard PDF card (JCPDS: 20-1315). If the temperature was increased to 800 °C, more carbon atoms entered into the lattices of W to form WC evidenced by the XRD peaks at 31°, 35°, and 48° stemming from the (001), (100), and (101) facets of WC (JCPDS: 65-8828).45 Thus, it was concluded that WO3 was consequently transferred to WO2, W, W2C, and WC when the temperature increased from 600 to 800 °C under a CH4/H2 atmosphere.46 As shown in Figure 1c, the specific surface areas of WO3, W2C, and WC estimated from the N2 adsorption/desorption isothermal curves were 13.0, 14.8, and 10.5 m2 g−1, respectively, which was indicative of stable structure during the carburization process. Continuously, the morphologies of the prepared electrocatalysts were measured by scanning electron microscopy (SEM) as shown in Figure 2a,b, suggesting that WO3 and W2C possessed perfect hollow spherical structures with a diameter of 5 μm. Additionally, WO2, W, and WC exhibited similar structures shown in Figure S1. The well-retained structure depicted that the carburization process negligibly affected the electrocatalyst structure. (The samples were defined as M-HS, where HS represents hollow microspheres.) Besides, from the SEM and transmission electron microscopy (TEM) images shown in Figure 2b,c, the W2C-HS electrocatalyst obtained a hollow structure because of the clearly observed pores in the SEM images and distinctly different brightness in the TEM image. Moreover, the high-resolution TEM (HR-TEM) image depicted that a lattice space of 0.23 nm was observed because of the main (102) plane of W2C-HS in good accordance with the XRD pattern. In order to understand the chemical environment and bonding configuration of the electrocatalyst, an X-ray photoelectron spectroscopy (XPS) test was conducted as shown in Figure S2. The two peaks observed at 37.7 and 35.6 eV were originated from W 4f5/2 and W 4f7/2 for WO3-HS, manifesting the presence of the W(VI) species (Figure 2d), whereas the two more peaks appeared at 33.9 and 31.8 eV were assigned to the W−C bond from W2C-HS (Figure 2e), similar to previous reports, and 4187

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191

ACS Omega

Article

Figure 4. HER performances of W2C-HS (a) and commercial Pt/C (b) electrocatalysts before and after the durability test. (c) Double-layer capacitance of W2C-HS before and after the durability test. (d) Chronoamperometric test of the W2C-HS electrocatalyst at −153 mV vs RHE. SEM image (e) and related EDS mappings (f,g) of W2C-HS electrocatalysts after the durability test.

W-HS < WC-HS < W2C-HS) well coincided with the HER performance. As well known, the massively generated hydrogen bubbles at high overpotential cover the active sites resulting in deterioration in HER electrocatalytic activity. In order to emphasize the advantage of the W2C-HS electrocatalyst, HER performances of commercial Pt/C and W2C-HS electrocatalysts were measured using the rotating disk electrode. As well known, mass-transfer resistance could affect the HER performance at high current density because of the limited interfaces between electrocatalyst and electrolyte as well as coverage of active sites byproducts. As shown in Figure 3e,f, the HER performance of commercial Pt/C became better, especially for overpotential@100 mA cm−2 decreased from 128 to 105 mV with the rotation speed increased to 900 rpm because the strongly adhered H2 bubbles were removed releasing more active sites similar to previous reports;54,55 in contrast, W2C-HS revealed a stable HER activity with almost negligible decrement (2 mV) for overpotential@100 mA cm−2 because of the hollow structure of W2C-HS beneficial for the release of hydrogen molecular resulting in no deterioration in ECSA and interfacial charge resistance. Thus, the hollow structure was beneficial for HER electrocatalytic activity at high current density. Durability is another important issue for HER electrocatalyst. As shown in Figure 4a, overpotentials@ 10 and 100 mA cm−2 were sharply increased from 31 and 128 to 46 and 251 mV for commercial Pt/C because of the aggregation/coalescence of Pt nanoparticles revealed by the

capacitance was estimated from the simulated slope of Δcurrent [email protected] versus scan rate shown in Figure 3b. The Tafel slope was extracted from LSV curves to study the HER kinetics, and commercial Pt/C with a Tafel slope of 29.5 mV dec−1 is shown in Figure 3c similar to previous report.52 W2CHS exhibited a much lower Tafel slope of 67.8 mV dec−1 compared to WO3-HS (107.4 mV dec−1), WO2-HS (98.8 mV dec−1), W-HS (80.7 mV dec−1), and WC-HS (75.4 mV dec−1) electrocatalysts, suggesting that W 2C-HS followed the Volmer−Heyrovsky HER mechanism, in which the desorption of a hydrogen molecule is the rate-determining step (H3O+ + *Hads + e− → H2 + H2O + *, * represents the active site).53 Additionally, the interfacial charge-transfer resistance (Rct) also significantly affected the HER activity, and electrochemical impedance spectroscopies (EIS) of all electrocatalysts were shown in Figure 3d, in which W2C-HS exhibited the lower Rct (60 Ω) compared to WC-HS (600 Ω), which could be due to the more metallic W in the electrocatalyst. It should be noted that all the EIS tests were performed at overpotential@10 mA cm−2 to study the electron transfer during the HER test. The high ECSA and low interfacial charge-transfer resistance cocontributed to the robust HER electrocatalytic activity of the W2C-HS electrocatalyst. It should be noted that the intrinsic electrocatalytic activity and the number of active sites play the significant role of HER performance. Because of the lowest ECSA of WO3-HS, WO3-HS showed the worst HER performance and the ECSA order (WO3-HS < WO2-HS < 4188

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191

ACS Omega

Article

decreased ECSAs shown in Figure S5 lost by ∼10%, although the W2C-HS electrocatalyst showed almost on degradation in the HER electrocatalytic activity (Figure 4b) because of the comparable ECSA (85.1 mF cm−2, Figure 4c) as well as a similar interfacial charge transfer resistance before and after the durability test (Figure S6). Meanwhile, W2C-HS could maintain a stable catalytic current density of 10 mA cm−2 for 10 h with an applied voltage of −153 V versus RHE as shown in Figure 4d. In addition, the overpotential@100 mA cm−2 (264 mV) for W2C-HS was comparable to that of commercial Pt/C after durability test (251 mV), indicating that the W2C electrocatalyst performed a similar HER activity to commercial Pt/C. W2C-HS retained a similar structure after durability test and the EDS mappings revealed its high durability (Figure 4e− g). The TEM image shown in Figure S7 depicted that the structure was well maintained after durability test confirmed by the lattice spacing of 0.23 nm assigned to the dominant (102) facet of W2C. Meanwhile, peaks at 33.9 and 31.8 eV (Figure S8) were attributed to the W−C bond from W2C-HS coincided with TEM test. Continuously, the HER performance of W2C-HS was tested in alkaline and neutral media shown in Figure S9, in which the overpotentials for delivering 10 mA cm−2 were 240 and 735 mV versus RHE in 1 M KOH and 1 M phosphate-buffered saline (PBS) electrolyte, respectively. The lower HER activities tested in 1 M KOH and 1 M PBS compared to the HER performance in acidic medium was due to the lower ECSA calculated from double-layer capacitance (11.5 and 5.6 mF cm−2 in 1 M KOH and 1 M PBS). Thus, W2C-HS performed high HER electrocatalytic activity and ultrahigh durability in acidic medium, indicating that W2C-HS could be a potential substitution of Pt/C for large-scale industrial water-splitting.

Electrochemical Measurements. The HER performance was measured in 0.5 M H2SO4 electrolyte based on a threeelectrode cell, in which a glass carbon electrode, a carbon rod, and a saturated calomel electrode were used as working, counter, and reference electrodes, respectively. The catalyst loading was 0.285 mg cm−2 and LSV curve was measured with a scan rate of 5 mV s−1 and CV was carried out with 50 mV s−1 ranging from −0.3 to 0.2 V versus RHE. EIS was measured from 100 kHz to 0.01 Hz by VMP3 (Bio-Logic Science Instruments).

CONCLUSIONS In summary, we have synthesized novel W2C hollow microspheres (W2C-HS) as HER electrocatalysts. W2C-HS required 153 and 264 mV to deliver cathodic current densities of 10 and 100 mA cm−2. Moreover, W2C-HS showed an ultrahigh durability with almost no degradation in the HER activity after 20 000 potential cycles and performed a similar overpotential@100 mA cm−2 to commercial Pt/C after 2000 potential cycles. The high HER electrocatalytic activity of W2C-HS attributed to the hollow structures favorable for releasing of H2. The further improvement in the HER performance of the W2C-HS electrocatalyst is undergoing in our laboratory by optimization of size and shell thickness of the W2C-HS electrocatalyst.

Notes

■

ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsomega.8b03449.

■

SEM images, XPS, and cyclic voltammetry curves of WO3-HS, WO2-HS, W-HS, and W2C-HS electrocatalysts (PDF)

AUTHOR INFORMATION

Corresponding Authors

*E-mail: [email protected] (Z.Y.). *E-mail: [email protected] (W.C.). ORCID

Zehui Yang: 0000-0002-5707-1905 Weiwei Cai: 0000-0002-7296-2730 Author Contributions

Y.L. and F.L. authors contributed equally. The manuscript was written through contributions from all authors. All authors have given approval to the final version of the manuscript.

■

The authors declare no competing financial interest.

■

ACKNOWLEDGMENTS This work is supported by the National Natural Science Foundation of China (nos. 21703212, 21503197, and 21601078) and Fundamental Research Funds for the Central Universities, China University of Geosciences (Wuhan) (CUG170615).

■

REFERENCES

(1) Yang, J.; Voiry, D.; Ahn, S. J.; Kang, D.; Kim, A. Y.; Chhowalla, M.; Shin, H. S. Two-Dimensional Hybrid Nanosheets of Tungsten Disulfide and Reduced Graphene Oxide as Catalysts for Enhanced Hydrogen Evolution. Angew. Chem., Int. Ed. 2013, 52, 13751−13754. (2) Zou, X.; Huang, X.; Goswami, A.; Silva, R.; Sathe, B. R.; Mikmeková, E.; Asefa, T. Cobalt-Embedded Nitrogen-Rich Carbon Nanotubes Efficiently Catalyze Hydrogen Evolution Reaction at All pH Values. Angew. Chem., Int. Ed. 2014, 53, 4372−4376. (3) Luo, F.; Zhang, Q.; Yu, X.; Xiao, S.; Ling, Y.; Hu, H.; Guo, L.; Yang, Z.; Huang, L.; Cai, W.; Cheng, H. Palladium Phosphide as a Stable and Efficient Electrocatalyst for Overall Water Splitting. Angew. Chem., Int. Ed. 2018, 57, 14862−14867. (4) Zhang, J.; Wang, T.; Pohl, D.; Rellinghaus, B.; Dong, R.; Liu, S.; Zhuang, X.; Feng, X. Interface Engineering of MoS2/Ni3S2 Heterostructures for Highly Enhanced Electrochemical OverallWater-Splitting Activity. Angew. Chem., Int. Ed. 2016, 55, 6702−6707. (5) Popczun, E. J.; Read, C. G.; Roske, C. W.; Lewis, N. S.; Schaak, R. E. Highly Active Electrocatalysis of the Hydrogen Evolution Reaction by Cobalt Phosphide Nanoparticles. Angew. Chem., Int. Ed. 2014, 53, 5427−5430.

■

EXPERIMENTAL SECTION Synthesis of WO3. Sodium tungstate dihydrate (1.5 g, Sinopharm, ≥99.5%) and 1.0 g of oxalic acid (Sinopharm, ≥99.8%) were dissolved in 30 mL of water with 40 mL of isopropanol (Sinopharm, ≥99.7%), and a moderate amount of 2 M HCl (Sinopharm, ≥36.0−38.0%) was added. Then, the solution was transferred to a 100 mL Teflon-lined stainless steel autoclave and heated up to 80 °C for 24 h. After cooling naturally, the as-prepared samples were calcined at 300 °C in a tube furnace with an Ar atmosphere. Synthesis of WxC-HS. The WO3 was heated to a specified temperature (700 and 800 °C) for 2 h with CH4 (20 sccm) and H2 (80 sccm) in a tube furnace. The final black product was filtered, washed, and dried for 5 h. 4189

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191

ACS Omega

Article

(6) Wang, Z.; Ren, X.; Luo, Y.; Wang, L.; Cui, G.; Xie, F.; Wang, H.; Xie, Y.; Sun, X. An ultrafine platinum-cobalt alloy decorated cobalt nanowire array with superb activity toward alkaline hydrogen evolution. Nanoscale 2018, 10, 12302−12307. (7) Zhang, Q.; Luo, F.; Ling, Y.; Guo, L.; Qu, K.; Hu, H.; Yang, Z.; Cai, W.; Cheng, H. Constructing Successive Active Sites for Metalfree Electrocatalyst with Boosted Electrocatalytic Activities Toward Hydrogen Evolution and Oxygen Reduction Reactions. ChemCatChem 2018, 10, 5194−5200. (8) Yang, Y.; Zhang, K.; Lin, H.; Li, X.; Chan, H. C.; Yang, L.; Gao, Q. MoS2-Ni3S2 Heteronanorods as Efficient and Stable Bifunctional Electrocatalysts for Overall Water Splitting. ACS Catal. 2017, 7, 2357−2366. (9) Ling, Y.; Yang, Z.; Zhang, Q.; Zhang, Y.; Cai, W.; Cheng, H. A self-template synthesis of defect-rich WS2 as a highly efficient electrocatalyst for the hydrogen evolution reaction. Chem. Commun. 2018, 54, 2631−2634. (10) Xiong, J.; Li, J.; Shi, J.; Zhang, X.; Suen, N.-T.; Liu, Z.; Huang, Y.; Xu, G.; Cai, W.; Lei, X.; Feng, L.; Yang, Z.; Huang, L.; Cheng, H. In Situ Engineering of Double-Phase Interface in Mo/Mo2C Heteronanosheets for Boosted Hydrogen Evolution Reaction. ACS Energy Lett. 2018, 3, 341−348. (11) Chen, Y.-Y.; Zhang, Y.; Jiang, W.-J.; Zhang, X.; Dai, Z.; Wan, L.-J.; Hu, J.-S. Pomegranate-like N,P-Doped Mo2C@C Nanospheres as Highly Active Electrocatalysts for Alkaline Hydrogen Evolution. ACS Nano 2016, 10, 8851−8860. (12) Lu, C.; Tranca, D.; Zhang, J.; Hernández, F. R.; Su, Y.; Zhuang, X.; Zhang, F.; Seifert, G.; Feng, X. Molybdenum Carbide-Embedded Nitrogen-Doped Porous Carbon Nanosheets as Electrocatalysts for Water Splitting in Alkaline Media. ACS Nano 2017, 11, 3933−3942. (13) Hou, J.; Sun, Y.; Li, Z.; Zhang, B.; Cao, S.; Wu, Y.; Gao, Z.; Sun, L. Electrical Behavior and Electron Transfer Modulation of Nickel−Copper Nanoalloys Confined in Nickel−Copper Nitrides Nanowires Array Encapsulated in Nitrogen-Doped Carbon Framework as Robust Bifunctional Electrocatalyst for Overall Water Splitting. Adv. Funct. Mater. 2018, 28, 1803278. (14) Xie, J.; Xie, Y. Transition Metal Nitrides for Electrocatalytic Energy Conversion: Opportunities and Challenges. Chem.Eur. J. 2015, 22, 3588−3598. (15) Zhang, Y.; Ouyang, B.; Xu, J.; Chen, S.; Rawat, R. S.; Fan, H. J. 3D Porous Hierarchical Nickel-Molybdenum Nitrides Synthesized by RF Plasma as Highly Active and Stable Hydrogen-Evolution-Reaction Electrocatalysts. Adv. Energy Mater. 2016, 6, 1600221. (16) Du, C.; Yang, L.; Yang, F.; Cheng, G.; Luo, W. Nest-like NiCoP for Highly Efficient Overall Water Splitting. ACS Catal. 2017, 7, 4131−4137. (17) Zhang, Y.; Zhang, H.; Feng, Y.; Liu, L.; Wang, Y. Unique Fe2P Nanoparticles Enveloped in Sandwichlike Graphited Carbon Sheets as Excellent Hydrogen Evolution Reaction Catalyst and Lithium-Ion Battery Anode. ACS Appl. Mater. Interfaces 2015, 7, 26684−26690. (18) Xue, Z.-H.; Su, H.; Yu, Q.-Y.; Zhang, B.; Wang, H.-H.; Li, X.H.; Chen, J.-S. Janus Co/CoP Nanoparticles as Efficient Mott− Schottky Electrocatalysts for Overall Water Splitting in Wide pH Range. Adv. Energy Mater. 2017, 7, 1602355. (19) Ji, Y.; Yang, L.; Ren, X.; Cui, G.; Xiong, X.; Sun, X. Nanoporous CoP3 Nanowire Array: Acid Etching Preparation and Application as a Highly Active Electrocatalyst for the Hydrogen Evolution Reaction in Alkaline Solution. ACS Sustainable Chem. Eng. 2018, 6, 11186−11189. (20) Xing, Z.; Liu, Q.; Asiri, A. M.; Sun, X. High-Efficiency Electrochemical Hydrogen Evolution Catalyzed by Tungsten Phosphide Submicroparticles. ACS Catal. 2014, 5, 145−149. (21) Tian, J.; Liu, Q.; Asiri, A. M.; Sun, X. Self-Supported Nanoporous Cobalt Phosphide Nanowire Arrays: An Efficient 3D Hydrogen-Evolving Cathode over the Wide Range of pH 0-14. J. Am. Chem. Soc. 2014, 136, 7587−7590. (22) Chen, Y.-Y.; Zhang, Y.; Zhang, X.; Tang, T.; Luo, H.; Niu, S.; Dai, Z.-H.; Wan, L.-J.; Hu, J.-S. Self-Templated Fabrication of MoNi4/MoO3-x Nanorod Arrays with Dual Active Components for Highly Efficient Hydrogen Evolution. Adv. Mater. 2017, 29, 1703311.

(23) Jin, Y.; Wang, H.; Li, J.; Yue, X.; Han, Y.; Shen, P. K.; Cui, Y. Porous MoO2 Nanosheets as Non-noble Bifunctional Electrocatalysts for Overall Water Splitting. Adv. Mater. 2016, 28, 3785−3790. (24) Zhu, Y. P.; Ma, T. Y.; Jaroniec, M.; Qiao, S. Z. Self-Templating Synthesis of Hollow Co3O4 Microtube Arrays for Highly Efficient Water Electrolysis. Angew. Chem., Int. Ed. 2017, 56, 1324−1328. (25) Ji, Y.; Yang, L.; Ren, X.; Cui, G.; Xiong, X.; Sun, X. Full Water Splitting Electrocatalyzed by NiWO4 Nanowire Array. ACS Sustainable Chem. Eng. 2018, 6, 9555−9559. (26) Xu, X.; Ge, Y.; Wang, M.; Zhang, Z.; Dong, P.; Baines, R.; Ye, M.; Shen, J. Cobalt-Doped FeSe2-RGO as Highly Active and Stable Electrocatalysts for Hydrogen Evolution Reactions. ACS Appl. Mater. Interfaces 2016, 8, 18036−18042. (27) Xu, X.; Liang, H.; Ming, F.; Qi, Z.; Xie, Y.; Wang, Z. Prussian Blue Analogues Derived Penroseite (Ni,Co)Se2 Nanocages Anchored on 3D Graphene Aerogel for Efficient Water Splitting. ACS Catal. 2017, 7, 6394−6399. (28) Seh, Z. W.; Kibsgaard, J.; Dickens, C. F.; Chorkendorff, I.; Nørskov, J. K.; Jaramillo, T. F. Combining theory and experiment in electrocatalysis: Insights into materials design. Science 2017, 355, No. eaad4998. (29) Ross, P.; Stonehart, P. Surface characterization of catalytically active tungsten carbide (WC). J. Catal. 1975, 39, 298−301. (30) Chen, W.-F.; Wang, C.-H.; Sasaki, K.; Marinkovic, N.; Xu, W.; Muckerman, J. T.; Zhu, Y.; Adzic, R. R. Highly active and durable nanostructured molybdenum carbide electrocatalysts for hydrogen production. Energy Environ. Sci. 2013, 6, 943−951. (31) Ang, H.; Wang, H.; Li, B.; Zong, Y.; Wang, X.; Yan, Q. 3D Hierarchical Porous Mo2 C for Efficient Hydrogen Evolution. Small 2016, 12, 2859−2865. (32) Ma, F.-X.; Wu, H. B.; Xia, B. Y.; Xu, C.-Y.; Lou, X. W. D. Hierarchical β-Mo2C Nanotubes Organized by Ultrathin Nanosheets as a Highly Efficient Electrocatalyst for Hydrogen Production. Angew. Chem. 2015, 127, 15615−15619. (33) Dong, J.; Wu, Q.; Huang, C.; Yao, W.; Xu, Q. Cost effective Mo rich Mo2C electrocatalysts for the hydrogen evolution reaction. J. Mater. Chem. A 2018, 6, 10028−10035. (34) Xiong, K.; Li, L.; Zhang, L.; Ding, W.; Peng, L.; Wang, Y.; Chen, S.; Tan, S.; Wei, Z. Ni-doped Mo2C nanowires supported on Ni foam as a binder-free electrode for enhancing the hydrogen evolution performance. J. Mater. Chem. A 2015, 3, 1863−1867. (35) Sun, L.; Wang, C.; Sun, Q.; Cheng, Y.; Wang, L. Self-Assembly of Hierarchical Ni-Mo-Polydopamine Microflowers and their Conversion to a Ni-Mo2 C/C Composite for Water Splitting. Chem.Eur. J. 2017, 23, 4644−4650. (36) Xiao, P.; Ge, X.; Wang, H.; Liu, Z.; Fisher, A.; Wang, X. Novel Molybdenum Carbide-Tungsten Carbide Composite Nanowires and Their Electrochemical Activation for Efficient and Stable Hydrogen Evolution. Adv. Funct. Mater. 2015, 25, 1520−1526. (37) Yan, G.; Wu, C.; Tan, H.; Feng, X.; Yan, L.; Zang, H.; Li, Y. NCarbon coated P-W2C composite as efficient electrocatalyst for hydrogen evolution reactions over the whole pH range. J. Mater. Chem. A 2017, 5, 765−772. (38) Wei, H.; Xi, Q.; Chen, X.; Guo, D.; Ding, F.; Yang, Z.; Wang, S.; Li, J.; Huang, S. Molybdenum Carbide Nanoparticles Coated into the Graphene Wrapping N-Doped Porous Carbon Microspheres for Highly Efficient Electrocatalytic Hydrogen Evolution Both in Acidic and Alkaline Media. Adv. Sci. 2018, 5, 1700733. (39) Cui, W.; Cheng, N.; Liu, Q.; Ge, C.; Asiri, A. M.; Sun, X. Mo2C Nanoparticles Decorated Graphitic Carbon Sheets: BiopolymerDerived Solid-State Synthesis and Application as an Efficient Electrocatalyst for Hydrogen Generation. ACS Catal. 2014, 4, 2658−2661. (40) Gao, W.; Shi, Y.; Zhang, Y.; Zuo, L.; Lu, H.; Huang, Y.; Fan, W.; Liu, T. Molybdenum Carbide Anchored on Graphene Nanoribbons as Highly Efficient All-pH Hydrogen Evolution Reaction Electrocatalyst. ACS Sustainable Chem. Eng. 2016, 4, 6313−6321. (41) Yu, F.; Zhou, H.; Huang, Y.; Sun, J.; Qin, F.; Bao, J.; Goddard, W. A.; Chen, S.; Ren, Z. High-performance bifunctional porous non4190

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191

ACS Omega

Article

noble metal phosphide catalyst for overall water splitting. Nat. Commun. 2018, 9, 2551. (42) He, W.; Ifraemov, R.; Raslin, A.; Hod, I. Room-Temperature Electrochemical Conversion of Metal-Organic Frameworks into Porous Amorphous Metal Sulfides with Tailored Composition and Hydrogen Evolution Activity. Adv. Funct. Mater. 2018, 28, 1707244. (43) Li, J.; Liu, X.; Cui, J.; Sun, J. Hydrothermal synthesis of selfassembled hierarchical tungsten oxides hollow spheres and their gas sensing properties. ACS Appl. Mater. Interfaces 2015, 7, 10108−10114. (44) Bigey, C.; Maire, G. Catalysis on Pd/WO3 and Pd/WO2. J. Catal. 2000, 196, 224−240. (45) Fang, Z. Z.; Wang, X.; Ryu, T.; Hwang, K. S.; Sohn, H. Y. Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbideA review. Int. J. Refract. Met. Hard Mater. 2009, 27, 288−299. (46) Löfberg, A.; Frennet, A.; Leclercq, G.; Leclercq, L.; Giraudon, J. M. Mechanism of WO3 Reduction and Carburization in CH4/H2 Mixtures Leading to Bulk Tungsten Carbide Powder Catalysts. J. Catal. 2000, 189, 170−183. (47) Krasovskii, P. V.; Malinovskaya, O. S.; Samokhin, A. V.; Blagoveshchenskiy, Y. V.; Kazakov, V. A.; Ashmarin, A. A. XPS study of surface chemistry of tungsten carbides nanopowders produced through DC thermal plasma/hydrogen annealing process. Appl. Surf. Sci. 2015, 339, 46−54. (48) Gong, Q.; Wang, Y.; Hu, Q.; Zhou, J.; Feng, R.; Duchesne, P. N.; Zhang, P.; Chen, F.; Han, N.; Li, Y.; Jin, C.; Li, Y.; Lee, S.-T. Ultrasmall and phase-pure W2C nanoparticles for efficient electrocatalytic and photoelectrochemical hydrogen evolution. Nat. Commun. 2016, 7, 13216. (49) Liu, C.; Wen, Y.; Lin, L.; Zhang, H.; Li, X.; Zhang, S. Facile insitu formation of high efficiency nanocarbon supported tungsten carbide nanocatalysts for hydrogen evolution reaction. Int. J. Hydrogen Energy 2018, 43, 15650. (50) Emin, S.; Altinkaya, C.; Semerci, A.; Okuyucu, H.; Yildiz, A.; Stefanov, P. Tungsten carbide electrocatalysts prepared from metallic tungsten nanoparticles for efficient hydrogen evolution. Appl. Catal., B 2018, 236, 147−153. (51) Liu, C.; Zhou, J.; Xiao, Y.; Yang, L.; Yang, D.; Zhou, D. Structural and electrochemical studies of tungsten carbide/carbon composites for hydrogen evolution. Int. J. Hydrogen Energy 2017, 42, 29781−29790. (52) Duan, J.; Chen, S.; Jaroniec, M.; Qiao, S. Z. Porous C3N4 Nanolayers@N-Graphene Films as Catalyst Electrodes for Highly Efficient Hydrogen Evolution. ACS Nano 2015, 9, 931−940. (53) Zheng, Y.; Jiao, Y.; Li, L. H.; Xing, T.; Chen, Y.; Jaroniec, M.; Qiao, S. Z. Toward Design of Synergistically Active Carbon-Based Catalysts for Electrocatalytic Hydrogen Evolution. ACS Nano 2014, 8, 5290−5296. (54) Wang, G.; Parrondo, J.; He, C.; Li, Y.; Ramani, V. Pt/C/ Ni(OH)2Bi-Functional Electrocatalyst for Enhanced Hydrogen Evolution Reaction Activity under Alkaline Conditions. J. Electrochem. Soc. 2017, 164, F1307−F1315. (55) Sheng, W.; Gasteiger, H. A.; Shao-Horn, Y. Hydrogen Oxidation and Evolution Reaction Kinetics on Platinum: Acid vs Alkaline Electrolytes. J. Electrochem. Soc. 2010, 157, B1529−B1536.

4191

DOI: 10.1021/acsomega.8b03449 ACS Omega 2019, 4, 4185−4191