Comparison of Acidizing and Ultrasonic Waves, and Their

The latter is characterized by efficient, simple and convenient, and environmentally secure method. Due to these distinguished characteristics, the de...
0 downloads 0 Views 2MB Size
Subscriber access provided by UNIVERSITY OF ADELAIDE LIBRARIES

Article

The comparison of acidizing and ultrasonic waves, and their synergetic effect for the mitigation of inorganic plugs Nasir Khan, jingyang pu, Chunsheng Pu, Xu Li, Lei Zhang, Gu Xiaoyu, and Heng Zheng Energy Fuels, Just Accepted Manuscript • DOI: 10.1021/acs.energyfuels.7b00622 • Publication Date (Web): 31 Aug 2017 Downloaded from http://pubs.acs.org on September 1, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Energy & Fuels is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 40

Energy & Fuels

Original Core 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Core

Ultrasonic Treatment

Acidizing Treated Core

Damaged Core

Treated Core

A A Core

Core

A - Particle B-Inorganic plugs

B

Synergetic Effect of Ultrasonic & Acidizing

ACS Paragon Plus Environment

Treated Core

Core

Core

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The comparison of acidizing and ultrasonic waves, and their synergetic effect for the mitigation of inorganic plugs

1 2 3 4 5 6 7 8 9

Nasir Khan1, Jingyang Pu2, Chunsheng Pu1,*, Li Xu1, Zhang Lei1, Gu Xiaoyu1, Heng Zheng1 1

School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, 266555, China

2

Dept. of Petroleum Engineering, Missouri University of Science and Technology, Rolla, MO, 65401

ABSTRACT

10

Oil and gas industry is plagued by inevitable formation damaged in the wellbore

11

proximity during entire life of the well. Therefore, it is indispensable to ameliorate the

12

damaged permeability by either using conventional applied techniques or ultrasonic-assisted

13

stimulation method. The latter is characterized by efficient, simple and convenient, and

14

environmentally secure method. Due to these distinguished characteristics, the demand of this

15

physical Enhanced Oil Recovery (EOR) technique increased in petroleum industry. In this

16

study, ultrasonic waves and hydrochloric acid (HCl) were used separately as well as in

17

combination to recover the lost productivity caused by calcium carbonate (CaCO3) inorganic

18

plugs in low permeability sandstone core samples. Results showed that permeability recovery

19

increased with irradiation time upto 100 mins; however, it decreased with further irradiation.

20

This deviation could be due to particles bridge formation at later stage. In addition, optimum

21

frequency and power of ultrasonic waves (20 KHz and 1000 W) significantly recovered the

22

damaged permeability. Although maximum frequency (25 KHz) could not achieve maximum

23

permeability, but higher power was quite effective. The damaged permeability recoveries of

24

HCl and ultrasonic waves were 44.5 % and 37.6 % respectively, but the permeability

25

recovery was escalated to 61.5 % when HCl and ultrasonic techniques were applied together.

26

Inorganic plugs using ultrasonic waves could chiefly be caused by cavitation, acoustic

27

streaming, and heat generation in three different ways, such as cavitation, boundary friction Page 1 of 39

ACS Paragon Plus Environment

Page 2 of 40

Page 3 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

and transformation upon hitting the medium.

2

* Corresponding Author: Email: [email protected], Tel# 00 86 132 1084 6217

3 4 5

KEYWORDS Inorganic plugs; Formation damage; Permeability recovery; Ultrasonic waves; Core

6

flooding

7

1. INTRODUCTION

8

Formation damage plagues the oil industries in term of the natural permeability descent

9

and loss in the total revenue during the entire life of the well. Formation damage can be

10

well-defined as the original permeability loss of the sub-surface reservoir rock nearby

11

wellbore which does occur during variant well operations at varying degrees1,2 as depicted in

12

Figure 1. Long time ago, oil price was the main concern of the oil companies, but recent

13

energy crises divert companies’ attention towards reduction and recovery of the productivity

14

loss caused by inevitable formation damage.3 This unwanted occurrence can predominantly

15

be caused by pore obstruction, perforation, inorganic scale deposition and mechanical

16

deformation of formation under the stress, and fluid shear along with fluid/fluid or fluid/rock

17

incompatibility1,2 as shown in Figure 2. However, inorganics plugs were considered as the

18

principal cause of formation damage.

Page 2 of 39

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1 2

Figure 1. Formation damage during various well operations at varying degree.

3 4

Figure 2. Permeability decline due to formation damage.

5

Inorganic scaling may occur anywhere from the subsurface reservoir to the production

6

facilities at the surface where established equilibrium is disturbed upon exploitation of oil and

7

gas.4 These inorganic scaling is mainly caused by the injection of incompatible water which

8

leads to severe well productivity loss nearby wellbore due to plugging of the pore throat.4,5 Page 3 of 39

ACS Paragon Plus Environment

Page 4 of 40

Page 5 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

However, scaling deposition is not restricted to the wellbore and also plague the industries

2

due to their formation in the well tubing. As it is beyond the scope of this study, so this

3

phenomenon will not be covered in current work. The well-known inorganic scaling at the

4

oilfields are calcium carbonate (CaCO3), gypsum (CaSO4), barium sulfate (BaSO4), and

5

strontium sulfate (SrSO4). The chief culprit of inorganic scaling is calcium carbonate (CaCO3)

6

which can be formed by mixing water from two different sources. Specifically, one water

7

source has high calcium ions concentration. Whereas, other water source is abundant in

8

carbonates at basic medium. Furthermore, it can alternatively be produced by pressure change

9

or alteration in fluid production pH5,6 as illustrated via reaction (1). As far as CaCO3 kinetics 7,8

10

is concern, it was presented by J. Moghadasi et al.

11

showed that increase in temperature triggers the rate of CaCO3 precipitation. Moreover, they

12

revealed that rise in temperature led to increase in supersaturation due to declining of calcium

13

carbonate solubility with rise in temperature. They also examined the effect of flow rate on the

14

concentration of CaCO3. They showed that increase in flow rate caused rapid supersaturation

15

of ions which resulted into increasing rate of CaCO3 precipitation. J. Moghadasi et al.

16

demonstrated that pressure drop during production phase of the well triggers CaCO3 scaling

17

deposition. Moreover, CO2 gas partial pressure increased pressure drop that resulted into

18

increase in scale deposition of calcium carbonate. In addition, higher pH also favored calcium

19

carbonate deposition.

20

21

via simulation model. Where they

Ca aq + 2HCO  aq ↔ CaCO s + H O + CO

The following reactions took place as shown below;

Page 4 of 39

ACS Paragon Plus Environment

7,8

(1)

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 6 of 40

Carbonic species and water equilibria:

2

CO + H O ↔ H CO

3

(2)

4

H CO ↔ H  + HCO

(3)

5

HCO  ↔ H  + CO 

(4)

6

H  + OH  ↔ H O

(5)

Ca + HCO  ↔ CaHCO 

(6)

7

Ion-pair equilibria:

8

Ca + CO  ↔ CaCO

9

Ca + OH  ↔ CaOH 

10

11

(7)

(8)

Solid- Liquid- Phase equilibrium

Ca + CO  ↔ CaCO s

12

(9)

13

Ionic equilibrium reaction is presumed to be occur spontaneously (within millisecond)

14

upon mixing of the solution in shown in reaction (2) to reaction (8). However, reaction (9) is

15

comparatively slow.

16

depend on the flow rate, pH of the system and temperature of environment.

17 18

9

Subsequently, reaction (9) decide the precipitation of CaCO3 that is

Similarly, sulfate scaling also results from blending of two water sources. Where one rich in sulfate ions and other has the abundance of divalent ions as illustrated by the reaction (10). Page 5 of 39

ACS Paragon Plus Environment

Page 7 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

M  aq + SO  aq ↔ MSO s

1

(10)

2

Whereas, M2+ can be Ca2+, Sr2+ or Ba2+

3

This scale deposition, rate of formation and formation’s place are decided by different

4

factors, such as brines in supersaturating condition, temperature and pressure profiles, pH

5

alteration of the saline solution due to dissolution or liberation of CO2 or H2S , inappropriate

6

brine

7

thermal-kinetics.10

solutions mixing,

presence of other inorganic acids, ions strength, and

8

The recovery of the lost well productivity needs frequent shut-in of the well for the

9

remedial treatment techniques in order to acquire the original permeability of the subsurface

10

formation but it directly influences the overall profitability of the company. Moreover,

11

restrictive effect of the acid on the insoluble calcium or barium sulfate makes chemical

12

removal technique impractical. Therefore, it is first line of defense to inhibit inorganic

13

deposition instead of costly and challenging treatments required at the later stages. For this

14

purpose, appropriate and threshold concentration of the complex phosphates along with sand

15

would be pumped into the formation during fracturing treatment which generates filter bed in

16

the subsurface formation. Subsequently, saline water becomes conditioned while passing

17

through the filter bed and insoluble carbonate and sulfate deposition would be prevented to

18

deposit. Complex phosphate ions act as polyphosphate ions which inhibit the crystal growth

19

of given nuclei by coating the available surface of the crystal. Consequently, new crystal

20

starts to form somewhere else. This process continues till equilibrium attainment among the

21

present ions in the solution where no further crystallization happens. As a result, various

22

micro-crystals appear as a colloidal instead of forming large crystal which tend to hamper the Page 6 of 39

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

flow channel in the subsurface formation. However, this stable equilibrium exists for certain

2

ion concentration which may again form crystallization and precipitation. Therefore,

3

sequestering agent is applied for the purpose of delaying insoluble minerals’ precipitation

4

which is characterized by low concentration of polyphosphate ions in the produced brine.

5

Otherwise, insoluble precipitate of calcium phosphate will be formed that will detrimentally

6

plug the formation.11 Hence, readily soluble phosphate such as calgon or trisodiumphosphate

7

is inappropriate to be applied for this aim.12 Despite protective measures, if inorganic scale

8

begins to form and descent the original permeability of the formation. Thereafter, various

9

treatment techniques, such as chemical treatment, thermal treatment and hydraulic fracturing

10

would mostly be employed to recover the lost productivity. However, environmental

11

implication and labor-intensive nature make the researcher to think about other potential

12

alternatives.3,13 In this connection, chemical treatment that involves hectic laboratory tasks

13

for better chemical selection according to the particular subsurface formation chemistry.

14

Besides, heat sensitive downhole assemblies would not openly allow thermal based recovery

15

and deleterious hydraulic fracturing technology. The aforementioned demerits of applied

16

techniques highlight the importance of ultrasonic-assisted techniques.

17

Ultrasonic waves have promising results in the removal of inorganic plugs in comparison

18

to traditional chemical method. In addition, ultrasonic waves have been the active and

19

non-trivial part of seismic and logging services since the beginning of the oil and gas

20

exploration.14 Conventional well stimulation techniques, particularly acidizing, require the

21

preparation of design fluid or acid for specific well job which make this technique

22

unattractive in comparison with acoustic technique.15 The acoustic approach is efficient, Page 7 of 39

ACS Paragon Plus Environment

Page 8 of 40

Page 9 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

simple and convenient, environment friendly, reliable, and low cost-effective. The

2

attractiveness of the ultrasonic waves becomes more charming due to the zonal control which

3

can be acquired via conveying of ultrasonic waves generation tool down the hole either by

4

using coil tubing or wireline in order to avoid water and gas prone region.16 Subsequently,

5

wellbore can be cleaned out due to falling of loosely suspended particles caused by the

6

vibration of high frequency ultrasonic waves and this phenomenon is more effective in

7

underbalance condition. Recent developments in the production equipments and the inception

8

of complex well trajectories such as horizontal well make wellbore cleaning a challenging

9

task by using conventional stimulation technology.17 Furthermore, wellbore is usually shut-in

10

in conventionally stimulation methods. In contrast, acoustic technique cannot only be used

11

during production phase, but it presents promising results in underbalance condition, too.18 In

12

this way, one can investigate the best exposure time for improved oil recovery by analyzing

13

real time effect.15 Moreover, simplicity in assembling the pertaining accessories makes this

14

technology more reliable and favorable.

15

The available literature in the application of ultrasonic waves for the formation damage

16

removal is limited. Some researchers have studied ultrasonic application to mitigate

17

formation damage in the proximity of the wellbore. Adinathan Venkitaraman et al.19

18

conducted successful experiment to remove fines and mud solids. Where they revealed that

19

approximately 20 – 80 KHz frequency and 20 – 250 W/m2 acoustic intensity were

20

investigated to successfully mitigate fines and mud solids by improving permeability by

21

factor of 3 to 7 of the damaged permeability core samples. Furthermore, they showed that the

22

effective depth of removal these kinds of plugs were found to be 2.5 inch. Beyond this limit, Page 8 of 39

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

ultrasonic waves technique was found to be ineffective in term of cleaning of fines and mud

2

solids. Meanwhile, Peter M. Roberts et al.20 applied ultrasonic waves technique to mitigate

3

formation damage caused by polymer and organic deposits. They illustrated that acoustic

4

wave worked well to recover the damaged permeability by resuspension of paraffin deposits

5

in comparatively short time span. Moreover, they showed that the treatment depth was found

6

to be 12-15 cm. According to their research, ultrasonic waves were found to be relatively less

7

effective in removing polymer plugs. Pu Chunsheng et al.21 conducted an experiment at

8

laboratory scale to remove formation damage and also confirmed the ultrasonic effect in low

9

permeability reservoir in northern Shaanxi Oilfield, China and Daqing Oilfield, China. They

10

observed that daily oil production was doubled after ultrasonic waves stimulation. Besides,

11

significant decrease in pressure and better performance in water-injection was also observed.

12

Xu Hongxing and Pu Chunsheng further investigated the influence of ultrasonic waves on the

13

removal of five different kinds of plugs.22 According to their results, permeability recovery

14

would increase with initial permeability of the core samples in the case of inorganic plugs

15

and fines removal. While inverse trend was observed in other kinds of plugs. However,

16

despite enormous research in this field, to best of our knowledge, no such in-depth studied is

17

reported so far in this research area for the removal of inorganic scaling by using ultrasonic

18

waves.

19

This paper compares the results acquired by the application of conventional acidizing

20

technique with ultrasonic-assisted inorganic plugs mitigation. Where, the latter technology is

21

characterized by efficient, simple and convenient, and environmentally secure. Moreover,

22

best-performing transducer with particular frequency and power besides optimum exposure Page 9 of 39

ACS Paragon Plus Environment

Page 10 of 40

Page 11 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

time were inspected for efficient and distinguished outcomes. The rational basis behind

2

optimized parameters was also clearly encompassed in current study. Experimental results of

3

the acidizing and ultrasonic techniques were compared with each other and also related with

4

synergetic effect of HCl and ultrasonic wave.

5

2.

6

The following section represents the employed materials as well as methods to obtain the

7

required research goal.

8

2.1. Materials and Equipments

9

2.1.1. Chemicals & Preparations

MATERIALS AND METHODS

10

The analytical grade sodium chloride (NaCl), anhydrous calcium chloride (CaCl2),

11

magnesium chloride hexahydrate (MgCl2.6H2O) and anhydrous sodium carbonate (Na2CO3)

12

with the corresponding purity of 99.5 %, 96 %, 98 % and 99.8 % were provided by

13

Sinopharm Chemical Reagent Co., Ltd. Different concentrations of brine solution with NaCl,

14

CaCl2 and MgCl2.6H2O salts in respective 7, 0.6 and 0.4 proportions. Whereas, for the

15

purpose of damaging the core samples, inorganic solution of Na2CO3 and CaCl2 were

16

prepared in separate containers with 200 g/L and 210 g/L concentrations respectively in order

17

to get exact stoichiometric ratio of 1:1. HCl (36.0 %) was procured from Kang De Chemical

18

Company Ltd.

19

2.2.2. Core Samples

20

Artificial core samples were acquired from Haian Petroleum Research Instrument Co.,

21

Ltd. The acquired core samples were categorized into three groups on the basis of their initial

22

gas permeability (30×10-3 µm2, 80×10-3 µm2 and 150×10-3 µm2) as given in the Table 1. Core

23

sample were numbered in such a way that the first digit indicates the permeability, for Page 10 of 39

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 40

1

example, core no. 3-35, core no. 8-46, and core no. 15-86 while digits after hyphen shows

2

particular core samples in that range.

3 4 5

6

Table 1. Core samples properties Permeability Length Constitutes (µm2) (cm) -3 30×10 6.0 Quartz & -3 80×10 6.0 Epoxy Resin 150×10-3 6.0

Diameter (cm) 2.5 2.5 2.5

Porosity (%) 20 22 24

Pore Volume (cm3) 5.88 6.47 7.06

ρ (g/cm3) 1.67

2.2.3. Ultrasonic irradiation system and core holder

7

Ultrasonic generator as an indispensable component of the entire system produces high

8

frequency ultrasonic waves. These ultrasonic generator were manufactured by Hangzhou

9

Success Ultrasonic Equipment Co. Ltd with the Brand Name: FYCG and Model# ZJS-2000.

10

The ultrasound transducer were also manufactured by Hangzhou Success Ultrasonic

11

Equipment Co. Ltd as depicted in Figure 3. All transducers’ probe are made of titanium alloy

12

and each having 1.912 cm diameter. As this experiment involves brine solution, therefore,

13

actual output power was found be same as manufacturer mentioned power. The gap between

14

core sample and transducers were kept 2-3 cm. Whereas, Haian Petroleum Research

15

Instrument Co., Ltd assembled the core holder. The type and dimension of core holder were

16

TY-5 and 2.5cm*2.5 cm~8 cm respectively. Where, core samples with the diameter 2.5 cm

17

and length ranging from 2.5 cm to 8 cm can be adjusted. The maximum 32 MPa pressure can

18

be sustained by the core holder.

Page 11 of 39

ACS Paragon Plus Environment

Page 13 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1 2 3

Figure 3. (a) Ultrasonic generator, (b) Ultrasonic transducers number 1 to 6 from left to right successively.

4

2.2. Essential prerequisite to the dynamic experiment

5

2.2.1. Critical velocity determination

6

The maximum fluid velocity which can possibly cause particle-bridge formation at the

7

pore throat is termed as critical velocity. In the case of fluid flow below critical velocity,

8

repulsive colloidal force among the particles at the pore throat dominates hydrodynamic

9

forces. When hydrodynamic forces are supposed to be stronger than repulsive force, the flow

10

velocity would be greater than critical velocity. Consequently, it results into particle-bridge

11

formation.23

12

Critical velocity of the respective sets of core samples were measured in this way. Air was

13

completely evacuated for the purpose of complete saturation before charging the high

14

pressure vessel with 80 g/L brine solution (NaCl: CaCl2: MgCl2·6H2O=7:0.6:0.4). In next

15

step, annular pressure was managed to be 3 MPa greater than the inlet pressure of the core in

16

the core holder. Thereafter, priming was carried out to remove all the air from the line

17

through the vent valve by adjusting the flow velocity (